Wrap – Glow Auto Studio

Client consultation: Discuss expectations, budget and wrap type (gloss, matte, satin, textured, printed).
Vehicle inspection: Evaluate paint condition, dents, scratches or body damage.

Thorough wash: Remove all dirt, grease, wax and contaminants using pH-neutral soap.
Clay bar treatment: Removes embedded debris from the paint surface.
Decontamination: Wipe down vehicle with isopropyl alcohol (IPA) to ensure a clean surface, especially around edges, trim and door handles.

Environment control: Install in a clean, dust-free, temperature-controlled workshop.
Dry fitting and measurements: Position vinyl without adhesive contact to ensure correct placement, size and alignment.
Application:
- Use heat gun and squeegee to stretch, mold and smooth the vinyl over curves and contours.
- Remove air bubbles with proper technique.
Tucking & trimming:
- Tuck excess vinyl into seams, under weather stripping and behind trim.
- Carefully trim excess with precision blades for clean edges.
Post-heating:
- Apply heat to all edges and curved areas to activate adhesive memory and prevent lifting.

Reassemble components: Reattach any removed parts with care to avoid damaging the wrap.
Final inspection: Check for bubbles, lifting, stretch marks, or improper alignment.